How much does MacBook repair cost in Singapore?

Why there is no flat MacBook rate

Ask five shops what a MacBook repair costs and, if they are being honest, all five will answer with two questions: which model, and what is wrong with it? A MacBook is not one product with one repair. A 2015 MacBook Air, a Touch Bar MacBook Pro, an M1 Air and a 16-inch M-series Pro with a Liquid Retina XDR display are wildly different machines inside, and the same fault costs a different amount on each. Layer the specific fault on top — display, battery, keyboard, charging circuit, storage, a logic-board component — and every combination carries its own part cost and its own labour.

A repair price is really two numbers added together: the cost of the part, and the time it takes a technician to fit or repair it. On a MacBook both numbers are unusually variable. Apple parts and assemblies are expensive, and the build is tight — glued batteries, bonded displays, soldered storage — so labour is higher than on a serviceable Windows laptop. That is why the same words, "my MacBook won't turn on", can lead to a bill in the low hundreds or well over a thousand, depending entirely on the cause. Instead of a single figure, the useful thing to understand is the band each common job typically falls into, and what moves you up or down inside it. This guide pairs with our repair-or-replace decision guide, which helps you judge whether a given repair is worth doing at all, and with our detailed MacBook repair procedures if you want to see how the work is done. For the same bands across laptop, iPhone, iPad and data recovery alongside MacBook, see our device repair cost report.

The big cost driver: whole-assembly vs component-level

If you only take one idea from this page, take this one. The single biggest thing that moves a MacBook repair quote up or down is how much of the machine gets replaced to fix the fault. Apple's own service model, and many shops that follow it, tend to swap the entire assembly rather than the one part that failed. A single dead key can be quoted as a whole new top case — which on modern MacBooks carries the battery, keyboard and trackpad all in one glued unit. A charging fault can be quoted as a whole replacement logic board. A hairline crack in the corner of the screen can be quoted as a complete display assembly.

That approach is fast and tidy, but you end up paying for a large, mostly healthy assembly to fix one small fault. Component-level repair is the alternative: replace only the part that actually failed — a charging IC, a backlight fuse, one flex cable, a cracked solder joint — and leave the rest of the working assembly alone. On many faults that is typically a fraction of the cost of a whole-assembly swap, and on Apple silicon MacBooks it has a second benefit: because the storage is soldered to the logic board, a board-level repair keeps your data in place where a board swap would take it away. It is not always possible — sometimes an assembly genuinely is the right call, and we will tell you honestly when that is the case — but on the common no-power, no-backlight and charging faults the component-level path, done through our MacBook logic board repair, usually saves a significant amount.

Realistic price bands for common MacBook repairs

The table below gives typical SGD bands for the MacBook repairs we are asked about most. Treat every figure as "usually in the region of", not a quote — your exact model, the part grade and the state of the machine all move the number, and the newest models with XDR displays or Apple silicon sit at the top of each range. The codes are just a reference for the notes that follow.

A few of those rows deserve a note. On battery jobs (MCB-01), older MacBooks take a straightforward glued cell, while many recent models integrate the battery into the top case, which lifts both the part cost and the labour — our MacBook battery replacement page explains which models are which. On displays, the panel-only route (MCB-02) is genuinely cheaper where it is possible, but on most Retina models the panel is bonded into the lid, so the full assembly (MCB-03) is the honest route — see MacBook screen replacement for the detail, and note the Liquid Retina XDR mini-LED panels on the larger MacBook Pro sit well above everything else. Keyboards (MCB-04) are similar: sometimes the keyboard can be replaced on its own, sometimes it is riveted into the top case, as our MacBook keyboard replacement page describes.

Two entries sit slightly apart because they are their own scales. Liquid-damage recovery (MCB-07) is never a fixed price: it depends on how far the corrosion has spread across the board and how many components need cleaning or replacing, so it is quoted only after the board is opened, inspected under the microscope and tested. Data recovery (MCB-08) is a separate service with its own pricing scale entirely — cloning a healthy drive is modest, while recovering from a failed logic board where the storage is soldered on is specialist work that sits much higher. See our data recovery services page for how that is assessed. Two considerations to flag when you get a quote: on Touch Bar models the Touch Bar itself and its flex are a known failure point that can add to a display or top-case job, and Touch ID is paired to the board, so a board-level repair has to preserve or re-pair it — both are things a proper diagnosis picks up before any figure is agreed.

What actually drives the price

Once you know a MacBook repair is not a flat rate, the next useful thing is understanding why two quotes for the "same" job can differ so much. A handful of factors do most of the work.

• The exact model and year. An older MacBook Air is far cheaper to work on than a current Apple silicon MacBook Pro. Newer machines have tighter builds, more integration, and pricier parts, so every band above shifts upward as the model gets newer and larger.
• The part inside. This is the big one for screens. A bonded Retina display assembly is expensive, and a Liquid Retina XDR mini-LED panel can cost several times as much again purely as a component, before any labour. Batteries and top cases vary the same way.
• Whole-assembly versus component-level. As above, replacing only the failed component — a charging chip, a backlight fuse, one connector — is usually far cheaper than swapping the entire top case, display or logic board. It is often a fraction of the assembly price where it is possible.
• Labour and bench time. Board-level microsoldering is billed by the hours it takes at the bench, which is why the logic-board band is the widest. A quick, well-known fault is short; tracing an intermittent board fault across a dense Apple silicon board is not.
• Data and storage risk. On Apple silicon MacBooks the storage is soldered to the logic board. A board swap can cost you your data, which is why a component-level repair that keeps the original board is often the difference between keeping and losing your files — and why data recovery is its own separate scale.
• Diagnosis and part availability. A common part in stock is quick and cheaper; a rare panel or a discontinued component that has to be sourced adds both cost and time.

Why a firm quote needs a diagnosis first

Here is the single most important idea in this whole guide: the symptom is not the fault. A MacBook that will not power on is the classic example. The cause could be a modest charging-IC repair; it could be a failed power rail that needs a little board-level soldering; or it could be a deeper logic-board fault that takes hours to trace. Those outcomes span a very wide range of prices, and from the outside — before anyone opens and tests the machine — they look identical. No honest technician can tell you which one you have over the phone, because the information simply is not there yet.

That is what a diagnosis is for. We open the MacBook, test the power rails, check the components under the microscope, and identify the actual failed part rather than the surface symptom. Only then can we tell you what the repair really involves and put a real number on it. At iDevice that diagnosis is free on walk-ins, and it ends in a written quote — the exact figure, the part, and the work — which you approve before we touch anything. Nothing is repaired, and you owe nothing, until you have said yes to a price in writing. We also work no-fix-no-fee: if we cannot resolve the fault you approved, you do not pay for the attempt. If, once you see the figure, the machine is not worth it, our repair-or-replace guide helps you weigh the alternative, and our quote process explains exactly how we work. If you also own a Windows machine, our companion laptop repair cost guide covers the same ground for non-Apple laptops.

Get a real figure for your MacBook

Bands are useful for planning, but the only number that matters is the one for your MacBook and your fault. Bring it in, or send a photo and a short description of what it is doing, and we will diagnose it, tell you exactly what failed, and put the cost in writing before any work begins. Diagnosis is free on walk-ins, the quote comes with no obligation, and if the sensible answer is to replace rather than repair, we will say so. When you are ready, our main MacBook repair page explains how the work is carried out, and specific jobs like battery replacement and keyboard replacement have their own detailed pages.